专业生产全系列气动/电动执行器
产品分类
联系我们
气动执行器
Sizing example of NUTORK double acting actuator:
Valve torque 100Nm plus 20% safety factor= 120Nm. Minimum operating pressure 6bar(87psig). By reading down the 6bar(87psig) column the figure below 120Nm is 135.0Nm, The model number shown in the left hand column is therefore NKD-092.
Valve torque 100Nm plus 20% safety factor= 120Nm. Minimum operating pressure 6bar(87psig). By reading down the 6bar(87psig) column the figure below 120Nm is 135.0Nm, The model number shown in the left hand column is therefore NKD-092.
Temperature Range:
Standard:-20°C(-68°F) to +80°C(+176°F)
Lower Temp.: -60°C(-140°F) to +60°C(+140°F)
High Temp.：0°C(+30°F) to +150°C(+300°F)
Standard:-20°C(-68°F) to +80°C(+176°F)
Lower Temp.: -60°C(-140°F) to +60°C(+140°F)
High Temp.：0°C(+30°F) to +150°C(+300°F)
High performance and high reliability
Fully compliant with the latest international standards and regulations
More applicable to a wide range of specifications and torque requirements
Compact design is better suited for a variety ofindustrial applications
Fully compliant with the latest international standards and regulations
More applicable to a wide range of specifications and torque requirements
Compact design is better suited for a variety ofindustrial applications
Advantages
Water Ingress Protected
O-Rings are fitted on bodies, caps and so on-this ensure water ingress protected.
ISO Valve Mounting
The NSF Series actuators interface meets ISO standard,and meets the dimensional requirements of ISO defined for each torque range.
Water Ingress Protected
O-Rings are fitted on bodies, caps and so on-this ensure water ingress protected.
ISO Valve Mounting
The NSF Series actuators interface meets ISO standard,and meets the dimensional requirements of ISO defined for each torque range.
NSF in extreme cold environment In extreme environment application, PTFE is used for seal and temperature pressure vessel steel (O9MnNiDR) is used for each module. The body will be welded with 09MnNiDR.
Product Characteristics
NAMUR Mounting
The accessory mounting holes of NSF series pneumatic actuators are in accordance with NAMUR standard, which is convenient for mounting position switches,positioners and other accessories.
ISO Connection Dimension
The flange size of NSF series pneumatic actuators and valves meets ISO 5211 international standard, which is convenient for customers to install, disassemble and replace.
NAMUR Mounting
The accessory mounting holes of NSF series pneumatic actuators are in accordance with NAMUR standard, which is convenient for mounting position switches,positioners and other accessories.
ISO Connection Dimension
The flange size of NSF series pneumatic actuators and valves meets ISO 5211 international standard, which is convenient for customers to install, disassemble and replace.
Large Thrust Range
NSF series double-acting actuators can provide a maximum output thrust of 2000000N, and single-acting actuators can provide a maximum output thrust of 300000N (working pressure 3-7 bar)
NSF series double-acting actuators can provide a maximum output thrust of 2000000N, and single-acting actuators can provide a maximum output thrust of 300000N (working pressure 3-7 bar)
肇恩工业设备(上海)有限公司
中国上海市青浦区诸光路900弄11号
中企跨境-全域组件 1.98
制作前进入CSS配置样式
屏蔽页面上图片的alt/title提示
右侧在线客服样式 1,2,3 1
图片alt标题设置： 肇恩工业设备(上海)有限公司
表单验证提示文本： 内容不能为空！
循环体没有内容时： 抱歉，未找到匹配的项目。
CSS / JS 文件放置地